Ten Rules A Safety Net Must Follow

Ten regulations that building safety nets must comply with. Building safety nets play a very important role in the process of building safety construction. In order to ensure the safety of the project, there are ten regulations that must be strictly followed during the use of building safety nets.

Next, let's find out together.

01

A safety net must be hung under the high work site; when the height of the building exceeds 4m, a safety net that gradually rises with the wall must be installed, and a fixed safety net must be installed every 4m thereafter;Safety nets must be installed at the outer frame, bridge frame, upper and lower holes.

02

The erection of the building debris net should be low inside and high outside, and the height difference of the expenditure part is generally about 5Ocm; the supporting rods are not broken or bent; the gap between the inner edge of the net and the wall should be less than 15cm; the distance between the lowest point of the net and the surface of the object below should be greater than 3m.

03

Check the safety net for corrosion and damage before use.

04

During the construction, it is necessary to ensure that the safety net is complete and effective, the support is reasonable, the force is uniform, and there are no sundries in the net. The lap joints must be tight and reliable without any gaps, and the safety nets erected must not be removed or damaged during construction.

05

For the support used for erecting the scaffolding mesh, the diameter of the small end of the wooden pole shall not be less than 7cm, the diameter of the small end of the bamboo pole shall not be less than 8cm, and the distance between the poles shall not be greater than 4m.

06

After the construction is completed, it must be restored by the construction unit immediately in accordance with the regulations, and it can only be used after passing the inspection of the erection unit.

07

The sundries in the net should be cleaned frequently, and effective measures should be taken to prevent welding sparks from falling on the net when performing welding operations on the top of the net, and there should be no serious acid-base fumes around the net for a long time.

08

Construction safety nets must be checked frequently when they are in use, and there are tracking records of use. Safety nets that do not meet the requirements should be dealt with in a timely manner.

09

The vertical net and the flat net must be strictly separated. The vertical net is never allowed to be used as a flat net. When erecting the vertical net, the tether at the bottom must be tied firmly.

10

When the debris netting is not in use, it must be properly stored and kept to prevent damp and mildew.