Code For Use Of Building Safety Net

With the rapid development of technology industry, the construction industry has also made great progress. In our daily life, we can often see the phenomenon of high-altitude operation. These are the areas that the construction industry needs to involve. In order to fully protect the operation safety of construction personnel, the manufacturer has developed the product of building safety net. At present, many construction sites have begun to use construction network, which is undoubtedly the safety optimization of the construction industry, but also an opportunity for the development of the network industry. Now let's look at the specifications for the use of building safety nets.

Firstly, in order to fully guarantee the personal safety of the construction personnel, the builder must set up a building safety net for the construction when working at high altitude. This is not only the protection of employees, but also the guarantee of construction effectiveness. When the height of the building exceeds 4m, a safety net must be set up gradually along with the wall, and then a fixed safety net should be set up every 4m. Safety nets must be set up at the top and bottom holes of the external frame and bridge frame. The installation of safety net should be low inside and high outside, and the difference of expenditure is generally about 5 Ocm.

Secondly, when construction safety net is set up, in order to ensure the use efficiency, the manufacturer must strictly check whether the internal support rod is damaged. If there is bending, the construction net should be dismantled and replaced as soon as possible. The clearance between the inner edge of the net and the wall should be less than 15 cm, and the distance between the lowest point of the net and the surface of the object below should be more than 3 m. The diameter of the small end of the wooden pole shall not be less than 7 cm, the diameter of the small end of the bamboo pole shall not be less than 8 cm, and the spacing of the poles shall not be greater than 4 M. These requirements must be met, otherwise safety will not be guaranteed.